| Value Name | Data Type | Value Data |
|---|---|---|
|
CacheLockOnOpen |
DWORD |
If this value is >0, forces the link to set cache lock on every document in an assembly that is currently under change by the user. If this value is 0, does not set cache lock. |
|
EnableBrowseDocSync |
DWORD |
If this value is 1, synchronize Meridian Browser page tree item with the open document. If this value is 0, disable synchronization. |
|
EnableBrowseVaultSync |
DWORD |
If this value is 1, synchronize Meridian Browser page vault context with the open document. If this value is 0, disable synchronization. |
|
EnableBrowsePage |
DWORD |
If this value is 1, enable Meridian Browser page. If this value is 0, disable page. |
|
EnableBrowsePageTips |
DWORD |
If this value is 1, enable Meridian Browser page tips. If this value is 0, disable page tips. |
|
EnablePRBaseToFileOnOpen |
DWORD |
If this value is 1, enable property synchronization from vault when opening document. If this value is 0, disable synchronization. |
|
EnablePRFileToBaseOnSave |
DWORD |
If this value is 1, enable property synchronization to vault when saving document. If this value is 0, disable synchronization. |
|
EnableReplacementsScan |
DWORD |
If this value is 1, enable scanning for replaced parts when opening document. If this value is 0, disable scanning. |
|
ReadOnlyReferences |
DWORD |
If this value is 1, forces the Don't prompt to save read-only referenced documents (discard changes) setting in the SolidWorks System Options dialog to enabled. If this value is 0, the SolidWorks setting is unaffected. |
